3-10 WINCH CONTROLS
DANGER
1. THE WINCH IS NOT DESIGNED OR
INTENDED TO BE USED FOR LIFTING
OR MOVING PEOPLE. USING IT THIS
WAY CAN CAUSE SERIOUS INJURY
OR DEATH.
2. NEVER ATTEMPT TO DISENGAGE
THE WINCH CABLE SPOOL WHEN THE
CABLE IS UNDER TENSION. THE LOAD
CAN ROLL AWAY. SERIOUS INJURY OR
DEATH CAN RESULT IF PEOPLE ARE IN
THE PATH OF THE ROLLING LOAD.
3. FAILURE TO LEAVE AT LEAST FIVE
WINCH CABLE WRAPS ON THE WINCH
CABLE SPOOL COULD ALLOW THE
CABLE TO COME OFF THE SPOOL,
RESULTING IN SERIOUS PERSONAL
INJURY OR DEATH.
3-10.1
The
WINCH CLUTCH (See Figure 3-3)
is located on the end of the winch.
IN
In this position, the clutch is engaged
and the hydraulic winch controls will
power spool the cable in or out.
OUT
In this position, the clutch is disen-
gaged and the winch will free-wheel.
To lock in the disengaged position,
pull handle all the way out and turn a
quarter turn.
3-10.2
The
WINCH HYDRAULIC CONTROLS
(See Figure 3-2)
are located on the hydrau-
lic control panel or the remote control
(See
Figure 3-4)
if present. It is a three position
control:
IN
This position will cause the winch to
reel cable onto the winch spool when
the winch clutch handle is engaged.
CENTER
This is neutral position. This position
will not operate the winch.
OUT
This position will cause the winch to
reel cable off of the winch spool
when the winch is engaged.
3-10.3
Operating the Winch
a.
Disengage the
WINCH CLUTCH
when pull-
ing the winch cable out by hand.
b.
Connect the hook to the vehicle and engage
the
WINCH CLUTCH
.
3-10.4
Use the
WINCH HYDRAULIC CON-
TROL
to pull a vehicle onto the trailer or to
let a vehicle off of the trailer.
3-8
Figure 3-3 Winch Clutch
Содержание 336C
