Landoll 318C, Руководство оператора

Страница: 21 / 76

3-6 HY DRAU LIC POWER SUP PLY EN GINE OP ER A TION
3-6.1 The Hy drau lic Power Sup ply En gine
sys tem is used to power the hy drau lic func -
tions, should the trac tor not be equipped with
hy drau lic hookups.
IM POR TANT
1. CHECK THE FOL LOW ING FLUID LEV ELS BE -
FORE START ING THE EN
GINE PACK AGE: EN -
GINE OIL, FUEL SUP PLY, AND HY DRAU LIC
OIL. (CHECK OIL LEVEL WHILE SEMITRAILER
IS NOT TILTED, AS TILT
ING WILL CHANGE
THE OIL LEVEL IN THE TANK.)
2. IF THE EN GINE DOES NOT CRANK, CHECK
THE FOL LOW ING ON THE BAT TERY: CHARGE,
FLUID, TER MI NALS, AND CA BLES. TAKE COR -
REC TIVE AC TIONS AS NEEDED.
CAU TION
IF THE HY DRAU LIC FLUID LEVEL IS
L O W D U R I N G O P E R A T I O N , T H E
SEMITRAILER MAY NOT OP
ER ATE
COR RECTLY, RE SULT ING IN DAM AGE
TO THE SEMITRAILER.
3-6.2
The EN GINE IG NI TION SWITCH is lo -
cated by the hy drau lic con trols on the
driver’s side of the semitrailer. Use the key to
start and stop the Hy
drau lic Power Sup ply
En gine (See Fig ure 3-2). This switch has
three po si tions:
OFF In this po si tion, the power pack age
en gine does not run. The key can
only be in serted or re moved from
this po si tion.
RUN In this po si tion, the en gine runs with -
out us ing the starter.
START In this po si tion, the starter cranks the
power pack
age en gine, let ting it
start. Af ter the en gine is started, re -
lease the key to the RUN po si tion.
3-6.3 The HY DRAU LIC POWER SUP PLY
EN GINE CHOKE (See Fig ure 3-2) is lo cated
by the En gine Ig ni tion Switch on the driver’s
side of the semitrailer. The pur
pose of the
Choke is to aid the start ing pro ce dure.
IN This is nor mal op er at ing po si tion.
OUT Set the choke in this po si tion as an
aid to start the en gine. Once the en -
gine is started, push in the choke
fully.
3-6.4 The HY DRAU LIC POWER SUP PLY
EN GINE THROT TLE is lo cated by the choke
on the driver’s side of the semitrailer. The
En
gine Throt tle con trols the speed at which
the en gine op er ates (See Fig ure 3-2). It is a
vari able po si tion con trol:
FULL OUT In this po si tion, the en gine throt tle is
fully open, let ting it run at full speed.
FULL IN In this po si tion, the en gine throt tle is
closed, let
ting the en gine run at a
slow idle.
3-9