Landoll 2511 IN-3-30 2511 N-4-30 2511 N-5-30, Руководство оператора

Страница: 37 / 60

ASSEMBLY INSTRUCTIONS
3-9
TABLE OF CONTENTS
Coverboard Installation
1. Insert four 1/2-13 x 2-1/2 Bolts into the Coverboard
Bracket before attaching the Coverboard Furrower.
( See Figure 3-6 .) Secure with 1/2-13 Locknuts and
tighten only so that locking portion of nut engages
the thread. The customer will tighten these nuts after
mounting to shank.
2. Tighten the 7/16-14 Flange Nut to the 7/16-14 x 1-1/4
Plow Bolt before tightening the 1/2-13 Locknut to the
1/2-13 x 1-1/2 Roundhead Bolt. This is to ensure that
the point of the Coverboard Furrower is pulled tightly
against the Bracket. Make sure that the Plow Bolt
Head is flush with the surface of the Coverboard
Furrower.
( See Figure 3-8 .) This hardware should be
tightened now.
Figure 3-8: Coverboard Installation
COVERBOARD FURROWER
COVERBOARD BRACKET
PLOW BOLT, 7/16-14 X 1-1/4
BOLT, 1/2-13 X 1-1/2
LOCKNUT, 1/2-13
FLANGED LOCKNUT, 1/2-13
FLANGED LOCKNUT, 7/16-14
BOLT,
1/2-13 X 2-1/2