Landmann Black Pearl 31324, Руководство по сборке и эксплуатации, Страница: 13 / 50

13 LANDMANN
Assembly procedure
CAUTION!
For your safety the screw heads should always point outwards, otherwise there is a risk of injury.
Only tighten all of the screw connections firmly when you have finished assembly otherwise
undesired material stress may result.
Assembly step 1
12
16
15
17
18
19
Connect the wheel and leg supports (15 + 12) using M5 x 32 bolts and M5 nuts to the shelf support (16).
Insert the axle (17) through the lower holes of the wheel legs (15) and secure the wheels (18) in place using lock
nuts M8. Clip the wheel caps (19) to the wheels (18).
•
•
Assembly step 2
12
15
13
11
8
10
Connect the supporting rods (13) with the front wheel
and leg stands and the back wheel and leg stands
using M6x60 screws.
Place the stand connector (11) to the stand support
(12) and wheel support (15). Fix the connection using
M5x30 bolts and nuts M5.
Guide the M6x50 bolts through the upper drill holes
in the support connectors and fix this with the special
nuts M6. The neck of the special nut has to be pulled
away from the support connector. Hang the shelves for
the side table only with the lower drill holes into the
special nuts and screw these into the other special nuts
M6, where the sleeve faces in the same direction as the
first special nut.
Screw the upper special nut M6 where the sleeve is
facing in the same direction as the other special nut,
and hang this into the brackets (8 and 10).
•
•
•
•