Landmann Avalon, Сборка и руководство по эксплуатации

Страница: 11 / 32

10 12791
Assembly
Here are a few tips to help you assemble your barbe-
cue quickly and successfully:
• Check that no parts are missing by carefully plac-
ing all of the individual parts in some free space
(subject to minor technical changes).
• If, despite careful factory checks, a component
should be missing, please contact our customer
service department (see last page). We will imme-
diately attend to your request.
• To assemble the barbecue you only need a medi-
um sized screwdriver.
• Only use tools that are intact and suitable for the
job at hand. Worn or unsuitable tools will not
allow you to tighten the bolts sufficiently, but will
damage them to the extent that they can no long-
er be turned.
• Always fit all connecting elements (screws, nuts,
bolts, etc.) as shown in the illustrations. If you
misplace a connecting element, replace it with
an appropriate part. Only by doing this can you
ensure that the construction is strong and safe.
• Be sure to follow the instructions in the specified
order!
• Even if you are not experienced at DIY, assembly
does not generally take longer than one hour.
Before assembling the barbecue release the trans-
port lock by using a screwdriver to remove the two
screws on the lid of the grill unit (5).
5
5
Transport lock
The illustrations showing the assembly steps are
at the end of this manual.
Connecting and disconnecting
the gas cylinder
Parts and tools needed
• Medium-sized screwdriver
• Gas cylinder
Standard camping gas cylinder with 3 or 5 kg liq-
uid gas (e.g. grey camping propane gas cylinder).
These are available at DIY shops or from liquid gas
suppliers.
Leak detector
• You can locate any leaks in the gas system using a
leak detector. This can be purchased at DIY shops
or liquid gas suppliers. Please follow the operating
instructions of the leak detector.
The following parts are included in delivery. They
comply with the standards applicable in the country
to which they have been supplied by Landmann.
Gas hose (pre-assembled)
-approved hose of a sufficient length (max. 1.5
m) to allow for kink-free assembly.
• Pressure regulator (pre-assembled to the gas hose)
Preset and -approved pressure regulator, max.
1.5 kg/h, operating pressure 50 mbar, suitable for
the gas cylinder used.
Before starting
Select a suitable, preferably wind-sheltered area in
which to set up the barbecue. Make sure that ...
• there are not, and will not be, any flammable
materials or substances nearby. The minimum dis-
tance to flammable materials or substances is 2 m
above and 1 m to the side of the barbecue; the
distance to less flammable materials or substances
is at least 0.25 m.
• the barbecue is positioned firmly on a sufficiently
large surface area. Secure the barbecue against
rolling away by applying the parking brakes on
the two right rollers. The barbecue must not be
moved during operation.