background image

L&L VENT-SURE DOWNDRAFT KILN VENT INSTRUCTIONS

ventsure-instruct.pdf 

REV: 8/1/2017 

Page 1

©

 

2017  

 

L&L Kiln Mfg, Inc.  505 Sharptown Rd, Swedesboro NJ 08085  856.294.0077   F:856.294.0070   [email protected]   hotkilns.com   

TABLE OF CONTENTS

READ THE INSTRUCTIONS

You are now the proud owner of an L&L “VENT-SURE” 

kiln ventilation system, engineered to give you the utmost 

in performance and results. This is an expensive and 

potentially hazardous appliance (if not used with proper 

caution). PLEASE TAKE THE TIME TO READ THESE 

INSTRUCTIONS. There is important information that you 

need to understand in order to operate your L&L kiln 

ventilation system safely and effectively.

USEFUL WEB LINKS

See this video on how to install a vent: 

hotkilns.com/install-vent-sure
See this video on how to drill holes for a vent: 

hotkilns.com/drilling-holes-vent-sure-vent-system

TABLE OF CONTENTS ................................................................. 1
READ THE INSTRUCTIONS ......................................................... 1
USEFUL WEB LINKS..................................................................... 1
CHECKING SHIPMENT ................................................................. 2
WHAT IS INCLUDED WITH VENT ................................................ 2
IMPORTANT CAUTIONS ............................................................... 2
INSTALLATION TIP BEFORE STARTING .................................... 2
INTRODUCTION ............................................................................ 3
KILN VENTILATION CAUTIONS ................................................... 3
INSTALLATION .............................................................................. 3
ROOM AIR REPLACEMENT ......................................................... 4
DRILL CHART ................................................................................ 5
OPERATION .................................................................................. 5
ADJUSTING THE  BYPASS SYSTEM .......................................... 5
VENTING CODES .......................................................................... 6
REGULAR MAINTENANCE ........................................................... 6
INSTALLATION OF MULTIPLE VENTS ........................................ 6
OPTIONAL VENT CONTROL ........................................................ 7
FREQUENTLY ASKED QUESTIONS ............................................ 7
FEATURES AND SPECIFICATIONS ............................................. 9
MOTOR SPECIFICATIONS ......................................................... 10
PARTS.......................................................................................... 10

Содержание M-V-VENT/00












Отзывы: