Operator Manual Landis Fume Buster Space Saver (SKU: FB19)
Landis International - 8
GROUNDING INSTRUCTIONS
WARNING: Improper connection of equipement grounding conductor can
result in the risk of electrical shock. Equipment should be grounded while
in use to protect operator from electrical shock.
•
Check with a qualifed electrician if grounding instruction are not
understood or if in doubt as to whether the tool is properly grounded.
•
This grinder is equiped with an approved 3-conductor cord rated at 115V
and a 3-prong, grounding type plug (see figure 1) for your protection
against shock hazards.
Figure 1 - 3-Prong Receptacle
•
Grounding plug should be plugged directly into a properly installed and
grounded 3-prong grounding-type receptacle (see figure 1).
•
Do not remove or alter grounding prong in any manner. In the event of a
malfunction or breakdown, grounding provides a path of least resistance
for electrical shock.
WARNING: Do not permit fingers to touch the terminals of plug when
installing or removing from outlet.
•
Plug must be plugged into matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances. Do not
modify plug provided. If it will not fit in outlet, have proper outlet installed
by a qualified electrician.
•
Inspect tool cords periodically, and, if damaged, have repaired by an
authorized service facility.
