manualshive.com logo in svg

Landis+Gyr E230, Руководство пользователя

Поделиться
Скачать
Landis+Gyr E230 Скачать руководство пользователя страница 3

Revision history 

      3/84 

D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual 

© Gyr 

Section 

6.9 MDTP (Manual Date Time Programming) (ZMR100xR 

only)

: MDTP information updated. 

Section 

6.9.1 Manual setting of date/time/ID

: figures redrawn and 

reprogramming date and counts added.

 

Section 

6.13 Communication interfaces

: RS485 interface added. 

Section 

6.14.2 Last configuration change identifier

: last configuration 

change identifier added. 
Section 

6.15 IEC formatted commands

: IEC formatted commands 

updated. 
Section 

7.2.1 Measurement Times

: new section added. 

f 

02.08.2013 

Release 2 updates: 
New photographs. 
Disclaimer updated. 
Section 

2.4.2 RTC (Real Time Clock) accuracy (ZMR100xR only)

 

updated. 
Section 

Starting values

 deleted. 

Section 

2.4.6 Power consumption

 updated. 

Section 

2.5 Data readout

 updated. 

Section 

4.1.1 Meter construction

 updated. 

Section 

4.1.5 Field of application

 updated. 

Section 

5.6.1 Installation mode

 updated. 

Section 

6.1 Customer display 

updated. 

Section 

6.1.1 Display cycle options 

updated. 

Section 

6.1.2 Example displays 

updated. 

Section 

6.1.3 Energy efficiency meter displays (ZMR100xC only) 

updated. 
Section 

Import and export energy (ZMR100xC only)

 deleted. 

Section 

1-day and 7-day consumption registers (ZMR100xC only)

 

deleted. 
Section 

6.1.6 Rate registers

 updated. 

Section 

6.3 Push button operation

 updated. 

Section 

6.4.1 Reverse energy detection (RED)

 updated. 

Section 

6.4.2 Tamper event log (ZMR100xR only)

 updated. 

Section 

6.4.5 DC magnetic field intrusion

 updated. 

Section 

6.4.6 Alert notification

 updated. 

Section 

6.6 ToU (Time-of-Use) tables (ZMR100xR only)

 updated. 

Section 

6.6.1 Tariff control (ZMR100xR only)

 updated. 

Section 

6.6.2 Load control (ZMR100xR only)

 updated. 

Section 

6.7 Maximum demand

 updated. 

Section 

6.7.4 Reset of maximum demand

 updated. 

Section 

6.8 Billing (stored values) (ZMR100xR only)

 updated. 

Section 

6.9.1 Manual setting of date/time/ID

 updated. 

Section 

6.11.1 Relay control (ZMR100xR only)

 updated. 

Section 

6.13 Communication interfaces

 updated. 

Section 

6.15 IEC formatted commands

 updated. 

g 14.01.2015 

Section 

6.4.2 Tamper event log (ZMR100xR only)

 updated. 

Section 

8 Error handling 

added. 

 

 

Although the information contained within this document are presented in good faith and believed to be correct, Gyr (including 
its affiliates, agents and employees) disclaim any and all liability for any errors, inaccuracies or incompleteness relating to the product. 
Gyr makes no warranty, representation or guarantee regarding the performance, quality, durability or suitability of the products 
for any particular purpose. To the fullest extent permitted by law Gyr disclaims (1) any and all liability arising out of the use of 
the product, (2) any and all liability, including, but without limitation to, special, consequential and indirect damages and losses, and (3) 
any and all implied warranties, including, but without limitation to, fitness for purpose and merchantability. 
The information contained in this document is strictly confidential and is intended for the addressee only. The unauthorised use, 
disclosure, copying, alteration or distribution of this document or the contents thereof is strictly prohibited and may be unlawful. 
All product information are subject to change without notice. 

 

Содержание E230





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды