Filename: User Guide Sabre Mk5 Rev 0.0.doc
Page 24 of 28
6.11. Meter State Register UPPER (Register 030)
1
The meter displays the most significant eight bits of the meter state register. This register
indicates the current state of the following meter functions:
Meter State Register – Upper
Display Function
1
xxx xxxx
Not Used
x
1
xx xxxx
Not used
xx
1
x xxxx
Not used
Xxx
1
xxxx
Not used
Press ‘030’ to toggle between UPPER set and LOWER sets of 4 numbers
xxxx
1
xxx Not
used
xxxx x
1
xx Not
used
xxxx xx
1
x Not
used
xxxx xxx
1
Waiting for Keypress (if non-auto latch reconnect enabled)
6.12. Meter State Register LOWER (Register 031)
1
The meter displays the least significant eight bits of the meter state register. This register
indicates the current state of the following meter functions:
Meter State Register – Lower
Display Function
1
xxx xxxx
Latch Inhibit
X
1
xx xxxx
Significant reverse power metered
xx
1
x xxxx
Not used
Xxx
1
xxxx
Meter decommissioned
Press ‘031’ to toggle between UPPER set and LOWER sets of 4 numbers
xxxx
1
xxx
Meter NOT initialised (default key)
xxxx x
1
xx
Meter in power limit trip
xxxx xx
1
x
Meter out of credit
xxxx xxx
1
Meter tampered
1
Because eight digits need to be displayed, but only 7 digits are available on the display, the number to be
displayed is grouped into two sets of four numbers each. The upper set is displayed on the left hand side of the
display, whilst the lower set is displayed on the right hand side. To toggle between the upper and lower sets, re-
enter the three digit code for that register (without pressing the information-key).
