
5
Figure 2 – Optional T-Seal
Figure 3 – T-Seal Installed
Each T-seal is installed by fully inserting it through the cover and through the baseplate assembly. Bend the T-
seal tab to prevent extraction. Next, bend the T-seal over so that it resides within the baseplate assembly
pocket. Finally, bend the top of the T-seal over so that it is flush against the cover.
4. Application
Information
4.1.
Available Meter Forms
The
FOCUS
is available in the following meter forms:
4.1.1. S-Base
•
Transformer rated: Class 10 & 20: 3S, 4S
•
Self-contained: class 100: 1S
•
Self-contained: class 200: 2S, 12S and 25S (Network)
•
Self-contained: class 320: 2SE
4.1.2. K-Base
•
Self-contained: class 480: 2K