26/31
Released
Anti-tamper Features
© Gyr (Pty) Ltd
Cashpower Three Phase V11
– User Guide
The feature of
tampering on significant reverse power
is always disabled in the Cashpower Three
Phase meters.
9.4
Resetting a Tamper Condition
Before resetting a tamper condition, care must be taken to remove the cause of the condition, e.g.
ensure that the meter is wired correctly and that the terminal cover is securely fitted to the meter and
that the tamper switch is closed. Failing to do this will cause an immediate tamper condition.
Once the terminal cover is fitted to the meter, check that the tamper switch is fully depressed by
checking the tamper switch status in the meter state registers. If a meter has been tampered, normal
operation can only be restored by entering a clear tamper voucher.
