Maintenance and Troubleshooting
53
The same hex head bolts used for tracking also tension the
treadbelt. To tighten the treadbelt, use the tool supplied with the
treadmill to turn both bolts clockwise exactly the same amount,
¼-turn at a time.
Note: Failure to turn bolts equally will affect belt tracking. DO
NOT OVER-TIGHTEN.
Continue checking for treadbelt slipping. When treadbelt is fully
tensioned, increase treadmill speed to 5 mph. Then, while
jogging lightly, check for any sudden slipping/hesitating of the
treadbelt. Repeat treadbelt tensioning if required.
TROUBLESHOOTING:
If your treadmill requires additional
troubleshooting, please contact your local service provider or
visit www.landice.com/pages/service-locator to arrange
service.
4.3.4. Scheduled Preventive Maintenance
Landice recommends that a qualified approved service
technician perform yearly maintenance. Please contact your
local service provider or visit www.landice.com/pages/service-
locator to select a Landice service provider and arrange
service.
WARNING
Lethal voltages and moving parts capable of
causing serious injury are exposed when the
motor cover is removed. Under no circumstances
should the motor cover be removed except by a
technician.
Содержание Move Series
