Landice Move Series, Руководство пользователя

Страница: 34 / 60

Installation
34
Figure 2-25. Leveling Feet
2. Place a level across the rear of the machine and stand in
the middle of the running surface, facing the rear of the
treadmill. Check if the bubble is centered on the level.
•
If the bubble goes to the right (while standing on
treadmill), adjust the left rear foot. Stop adjusting the
foot when the bubble is centered on the level.
• If the bubble goes to the left (while standing on
treadmill), adjust the right rear foot. Stop adjusting the
foot when the bubble is centered on the level.
3. Confirm that the bubble is centered on the level. Your
treadmill is now ready for use.
2.7. Check Operation
1. Plug the treadmill power cord into a dedicated power outlet.
Ensure that the power cord has plenty of slack and will not
be pinched beneath the treadmill as the treadmill elevates
up and down.
2. Ensure the safety lanyard block is pushed in. Turn on the
power switch located next to the power cord. Start the
treadmill and increase speed to 2 mph. Check that the
treadbelt is tracked (centered) and not moving off to one
side.
•
If belt is going toward one side, follow instructions in
“Treadbelt Tracking Adjustment” on page 51.
If belt is tracked (centered) correctly, proceed to walk on the
treadmill at 2 mph.