Landice L10 90 Series, Инструкция по установке и краткое руководство пользователя

Страница: 26 / 36

Installation Assembly
24
Upper Wire Harness through the Upright and out of the Upper
Access Hole (Figure 2-24).
Figure 2-24. Upper Wire Harness Routing Path
24. Connect the Ribbon Cable and the optional Pulse Cable, if present,
from the Lower Control Panel to the corresponding cables from the
Display Console (Figure 2-25).
25. Ensure cables are not crimped or caught between Display Console
and Upright and engage the studs on the Display Console in their
keyways and toward you to lock the Display Console in place
(Figure 2-25).
Figure 2-25. Console Assembly Installation
(cables not shown for clarity)
Upright Cable
Routing Hole
Guide Wire Tie
Stud (both sides)
Keyway
(both sides)