Landice L10 90 Series, Инструкция по установке и краткое руководство пользователя

Страница: 22 / 36

Installation Assembly
20
14. On both sides: Attach the Lower Control Assembly to the Upright
Brackets using one M8x16 Button Head Allen Screw (5mm) and
M8-6 Nut as shown in Figure 2-17. These are unlabeled, below the
Allen wrench on the blister pack as indicated by the red arrows in
Figure 2-1.
Figure 2-17. Lower Control Assembly Plate Hardware (both sides)
15. Remove the three 4mm M5x15 Socket Head Cap Screws holding
the Inner Handrail Covers to each Handrail as shown in Figure 2-
18 and place them in a safe place for reuse later when the Covers
are re-installed.
Figure 2-18. Handrail Inner Cover Hardware (both sides)
M8x16 Button
Head Allen Socket
M8-6 Nut
M5x15 Socket
Head Cap Screw
(3X)