
11
Operations
Operating Instructions
STEP 1:
Read engine warning and
operating instructions prior to
turning on the water. Check for
water leaks; tighten as needed.
STEP 3:
With the spray nozzle
pointed away from you or anybody
else, press the trigger on the spray
gun to obtain pressurized cold
water spray.
STEP 4:
For hot water, turn the
thermostat knob to 210° then push
the burner switch to ON when a
steady stream of water flows out of
the spray gun. Burner will now light
automatically.
NOTE:
Do not start
machine with burner switch on.
STEP 6:
The four color-coded
quick connect nozzles provide a
wide array of spray widths from 0°
to 45° and are easily accessible
when placed in the convenient
rubber nozzle holder, which is
provided on the front of the
machine.
NOTE:
For a more gentle rinse,
select the white 40° or green 25°
nozzle. To scour the surface, select
the yellow 15° or red 0° nozzle.
CAUTION: When using the 0°
nozzle to prevent surface and
injection damage and injury.
ATTENTION: En utilisant la buse
1° pour prévenir les dommages à
la surface et à l'injection, et les
blessures.
STEP 2:
Read engine manual
provided and pull choke. Pull spray
gun trigger to relieve pressure.
Then turn the engine switch to the
START position and hold it there
until the engine starts.
NOTE
: Do
not engage the electric starter for
more than five (5) seconds at a
time. If the engine fails to start,
release the switch, pull spray gun
trigger and wait ten seconds before
operating the starter again. When
the engine starts, allow the engine
switch to return to the ON position.
Push the choke in.
STEP 5:
For steam, open the
steam valve counterclockwise. This
lowers the pressure and raises the
temperature.
Landa SLT/SLX Gas Operator’s Manual 8.914-002.0 - AR
Choke
Keyhole
Ne
ver Use:
·
Bleach, chlo
rine products and other corrosiv
e chemical
s
·
Liquid
s containin
g solv
ents (i.e
. paint thinner
, gasoline
, oil)
·
T
ri-sodium p
hosphate products
·
Ammonia p
roducts
·
Acid-based products
These chemicals will
har
m the
unit and
will damage
the
surf
ace being cleaned.
Use manu
facturer’
s deterge
nts as recommended i
n manual
.
CA
UTION
Steam Valve
Burner
Switch
Thermostat
Knob
Nozzles