manualshive.com logo in svg

Landa PGHW series, Руководство оператора, Страница: 8 / 50

Поделиться
Скачать
Landa PGHW series Скачать руководство пользователя страница 8

8

Safety

22. Never run pump dry or leave spray gun closed 

longer than 1-2 minutes.

23. Machines with shut-off spray gun should not be 

operated with the spray gun in the off position for 
extensive periods of time as this may cause 
damage to the pump.

24. Protect discharge hose from vehicle traffic and 

sharp objects. Inspect condition of high pressure 
hose before using or bodily injury may result.

25. Before disconnecting discharge hose from water 

outlet, turn burner off and open spray gun to allow 
water to cool below 100° before stopping the 
machine. Then open the spray gun to relieve 
pressure. Failure to properly cool down or maintain 
the heating coil may result in a steam explosion.

26. Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

27. Do not operate this machine when fatigued or 

under the influence of alcohol, prescription medica-
tions, or drugs.

28. In oil burning models, use only kerosene, No. 1 

home heating fuel, or diesel. If diesel is used, add a 
soot remover to every tankful.

WARNING: Do not spray 
machines or any people, animals 
or electrical parts.

WARNING: If connection is made 
to a potable water system, the 
system shall be protected against 
back flow.

Follow the maintenance instructions 
specified in the manual. 

Landa PGHW Operator’s Manual   8.916-485.0 - Y

WARNING

NOT SUITABLE 

FOR CONNECTION

 TO THE POTABLE 

WATER MAINS.

WARNING

DO NOT SPRAY 

MACHINE OR ANY 

PEOPLE, ANIMALS OR 

ELECTRICAL PARTS.

Содержание PGHW series



















































Отзывы:

Нет отзывов