Landa HS-3000, Руководство оператора

Страница: 7 / 28

8.913-943.0 • LANDA HS • Rev. 4/13
7
PRESSURE
W
ASHER
OPERA
TOR’S MANU
AL
ASSEMBLY INSTRUCTIONS
STEP 1: Location of machine is
important. Avoid installing near
combustible material or in poorly
ventilated areas.
Connect the power cord into the
proper electrical outlet, then push
in the GFCI reset button. (Refer to
serial plate for information.)
STEP 2: Connect high pressure
hose from the attached pressure
washer (not included) to the hot
water discharge nipple by sliding
quick coupler collar back. Insert
quick coupler onto discharge nipple
and secure by pushing quick coupler
collar forward. (See page 6)
STEP 3:
Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage. Position safety latch to
prevent trigger from being pulled.
STEP 4:
Pull the spring-loaded col-
lar of the wand coupler collar back
to insert your choice of pressure
nozzle.
CAUTION: Never replace
nozzles without engaging the
safety latch on the spray gun
trigger.
89139430-4
Trigger
Gun
High Pressure
Hose
Safety
Latch
Trigger
Wand
STEP 5:
Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
High
Pressure
Nozzle
Wand
Collar
Pressure
Nozzle
Wand
Coupler
Collar