8.941-114.0
• LANDA EHW • Rev. 08/12
3
PRESSURE W
ASHER
OPERA
TOR’S MANU
AL
Thank you for purchasing a Landa Pressure Washer.
This manual covers the operation and maintenance of
the EHW4-20024C and EHW4-30024C washers. All
information in this manual is based on the latest product
information available at the time of printing.
Landa, Inc. reserves the right to make changes at any
time without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understanding
of the manufacturer’s operating instructions and warn-
ings before using this Landa pressure washer. Warning
information should be emphasized and understood. If
the operator is not fluent in English, the manufacturer’s
instructions and warnings shall be read to and discussed
with the operator in the operator’s native language by
the purchaser/owner, making sure that the operator
comprehends its contents.
Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.
This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.
When ordering parts, please specify model and
serial number.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using this machine basic pre-
cautions should always be followed, including the
following:
WARNING: To reduce the risk of
injury, read operating instruc-
tions carefully before using.
1. Read the owner's manual
thoroughly. Failure to fol-
low instructions could cause
malfunction of the machine
and result in death, serious
bodily injury and/or property
damage.
2. Know how to stop the machine and bleed pres-
sures quickly. Be thoroughly familiar with the
controls.
3. Stay alert — watch what you are doing.
4. All installations must comply with local codes.
Contact your electrician, plumber, utility company
or the selling distributor for specific details.
5. This machine requires that it be installed by a
qualified electrician. This product shall only be
connected to a power supply receptacle protected
by a ground fault circuit interrupter.
WARNING: Keep water spray
away from electric wiring or fa-
tal electric shock may result.
6. To protect the operator from
electrical shock, the machine
must be electrically ground-
ed. It is the responsibility of
the owner to connect this
machine to a UL grounded
Receptacle of proper voltage and amperage rat-
ings. Do not spray water near electrical compo-
nents. Do not touch machine with wet hands or
while standing in water. Always disconnect power
before servicing.
CAUTION: Spray gun kicks back — hold with both
hands.
7. Grip spray-gun and wand securely before start-
ing this machine. Failure to do this could result in
bodily injury from a whipping wand.
WARNING: Flammable liquids
can create fumes which can
ignite causing property dam-
age or severe injury.
WARNING: Risk of fire. Do
not install or operate near
a ny f l a m m a b l e l i q u i d s .
WARNING: Before obtaining
access to electric terminals,
all supply circuits must be disconnected.
9. Electrical appliances shall be installed only in
locations where combustible dusts and flammable
gases or vapors are not present. Do not store or
use gasoline near this machine.
WARNING: High pressure
stream of fluid that this equip-
ment can produce can pierce
skin and its underlying tissues,
leading to serious injury and
possible amputation.
WARNING: Risk of injection or
severe injury. Keep clear of
nozzle. Do not direct discharge
stream at persons. This equipment is to be used
only by trained operators.
10. Never make adjustments on machine while it is
in operation.
WARNING
READ OPERATOR’S
MANUAL THOROUGHLY
PRIOR TO USE.
WARNING
KEEP WATER SPRAY
AWAY FROM ELEC-
TRICAL WIRING.
WARNING
HIGH PRESSURE
STREAM CAN PIERCE
SKIN AND TISSUES.
INTRODUCTION & IMPORTANT SAFETY INFORMATION
WARNING
RISK OF FIRE. DO NOT
OPERATE NEAR
FLAMMABLE LIQUIDS.
Содержание EHW4-2000C
Страница 34: ......
Страница 36: ...Form 8 941 114 0 Revised 08 12 Printed in U S A...