Introduction
SPL0548 & SPL0560 Snow Pusher 303-454M
11/9/20
8
Land Pride welcomes you to the growing family of new
product owners. This Snow Pusher has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product.
Application
Land Pride’s SPL05 Series Snow Pushers are available in
popular sizes to fit your 60 and 70 BX tractor loader
equipped with or without a BX Quick Hitch. They are
designed to push snow and other loose materials straight
ahead without leaving windrows on the side or damaging
the pavement below when using the optional poly snow
blade.
The 05 Series is manufactured in 48" (1.22 m) and
60" (1.52 m) widths with 12 ga (2.7 mm) moldboard and
18" (46 cm) tall side panels. The SPL05 Snow Pushers
feature replaceable skid shoes. The Snow Pushers have
an optional 3/8" x 4" (1 cm x 10 cm) steel cutting edge or
optional 1/2" X 6" (1.3 cm x 15.2 cm) poly cutting edge.
The poly cutting edge helps prevent marking and other
damage to surfaces. Another optional feature of these
Snow Pushers is the pull back blade. The pull back blade
is great for pulling snow back from structures such as
garage doors. Orange markers are available as an
accessory to assist in locating the outer ends of the Snow
Pusher. The orange markers can not be used in
conjunction with the pull back option.
See
“Specifications & Capacities”
on page 26 and
“Features & Benefits”
on page 27 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Snow Pusher have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Bale
Grabber. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
39713
Introduction
