background image

3

Important Safety Information

6/26/06

RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters   312-708M

Land Pride

Table of Contents

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire

extinguisher handy.

Keep emergency numbers for

doctor, ambulance, hospital and
fire department near phone.

911

Wear
Protective Equipment

Protective clothing and equipment

should be worn.

Wear clothing and equipment

appropriate for the job. Avoid
loose fitting clothing.

Prolonged exposure to loud noise

can cause hearing impairment or
hearing loss. Wear suitable
hearing protection such as
earmuffs or earplugs.

Operating equipment safely

requires the full attention of the
operator. Avoid wearing radio
headphones while operating
machinery.

Avoid High
Pressure Fluids Hazard

Escaping fluid under pressure can

penetrate the skin causing serious
injury.

Avoid the hazard by relieving

pressure before disconnecting
hydraulic lines.

Use a piece of paper or

cardboard, NOT BODY PARTS, to
check for suspected leaks.

Wear protective gloves and safety

glasses or goggles when working
with hydraulic systems.

If an accident occurs, see a

doctor immediately. Any fluid
injected into the skin must be
surgically removed within a few
hours or gangrene may result.

These are common practices that may or may not be applicable to the products described in
this manual.

Keep Riders
Off Machinery

Riders obstruct the operator’s

view, they could be struck by
foreign objects or thrown from the
machine.

Never allow children to operate

equipment.

Содержание RCS3596

































Отзывы: