Land Pride RCR16 Series Скачать руководство пользователя страница 2

©

Copyright 2001 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual,
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land
Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect
the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for
ordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Land Pride

Table of Contents

RCR16 Series Rotary Cutters   312-742M

12/14/01

Important Safety Information  . . . . . . . . . . . . . . . . . 1

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Owner Assistance  . . . . . . . . . . . . . . . . . . . . . . . . 7

Serial Number Plate  . . . . . . . . . . . . . . . . . . . 7

Further Assistance  . . . . . . . . . . . . . . . . . . . . 7

Section 1 Assembly and Set-Up . . . . . . . . . . . . . . . 8

Tractor Requirements. . . . . . . . . . . . . . . . . . . . . . 8

Dealer Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . 8

Driveline Installation  . . . . . . . . . . . . . . . . . . . 9

Optional Equipment Assemblies  . . . . . . . . . . . . . 9

Front Chain Guards . . . . . . . . . . . . . . . . . . . . 9

Rear Chain Guards . . . . . . . . . . . . . . . . . . . . 9

Front Rubber Guards  . . . . . . . . . . . . . . . . . 10

Rear Rubber Guards  . . . . . . . . . . . . . . . . . 10

Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . 11

Section 2 Operating Instructions  . . . . . . . . . . . . . 12

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Operating Check List . . . . . . . . . . . . . . . . . . . . . 12

Cutting Instructions  . . . . . . . . . . . . . . . . . . . . . . 12

Leveling Procedure . . . . . . . . . . . . . . . . . . . . . . . 12

Nominal Cutting Height . . . . . . . . . . . . . . . . . . . . 13

Cutter Height Adjustment . . . . . . . . . . . . . . . . . . 14

Section 3 Maintenance and Lubrication . . . . . . . . 15

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Service Cutting Blades . . . . . . . . . . . . . . . . . 15

Shear Bolt Driveline . . . . . . . . . . . . . . . . . . . 15

Shear Bolt Replacement  . . . . . . . . . . . . 15

Driveline Clutch  . . . . . . . . . . . . . . . . . . . . . . 15

Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . 15

Clutch Assembly and Disassembly  . . . . . . . 16

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lubrication  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Gauge Wheel Spindle Tube . . . . . . . . . . . . . 17

Gauge Wheel Hub  . . . . . . . . . . . . . . . . . . . . 17

Gearbox  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Driveline U-Joints . . . . . . . . . . . . . . . . . . . . . 18

Driveline Shield Bearings . . . . . . . . . . . . . . . 18

Driveline Profiles. . . . . . . . . . . . . . . . . . . . . . 18

Section 4 Specifications and Capacities. . . . . . . . 19

Section 5 Features and Benefits  . . . . . . . . . . . . . . 20

Section 6 Troubleshooting . . . . . . . . . . . . . . . . . . . 21

Section 7 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . 23

Torque Values Chart for Common Bolt Sizes . . . 23

Warranty Statement  . . . . . . . . . . . . . . . . . . . . . . 24

Table of Contents

Содержание RCR16 Series





























Отзывы: