Land Pride OS1548 Скачать руководство пользователя страница 48

Страница: 48 / 66

Section 4: Maintenance & Lubrication

Table of Contents

OS1548 and OS1572 Overseeder (S/N ) 308-303M

11/28/18

Rear Roller Drive Disconnect

Figure 4-3

Refer to Figure 4-4:

4. Remove right-hand side or rotor from the Overseeder

by removing 1/2" x 1 1/4" bolts (#2), lock washer (#3),
hex nut (#4), and right-hand bearing mount plate (#1)
from the Overseeder main frame.

Refer to Figure 4-5:

5. Disconnect left-hand side of rotor from rotor drive

hub (#1) by removing 7/16" x 1" long bolts (#3) and
7/16" lock washers (#2).

Refer to Figure 4-6:

6. Remove bearing mount plate (#1) from bearing

housing assembly (#4). Take care not to damage
gaskets (#2) on either side of the right-hand bearing
mount plate.

Remove snap ring (#3) and bearing (#4) from the
rotor shaft.

8. Loosen two set screws (#5) in seal guard hub (#6)

and slide hub off the rotor shaft.

9. Clamp rotor shaft on one of the knife mounting

flanges and, using a spanner wrench, unscrew
(left-hand threads) non-drive rotor flange (#7).

10. Slide knife mounting flanges (#8) and spacers (#9)

off rotor shaft.

11. Replace knives (#12) as needed using new 7/16"

locknuts, Land Pride part no. 803-108C. Torque nuts
to 68 ft-lbs.

12. Inspect bearing (#4) and bearing seal for wear and

replace if necessary.

13. Reassemble spacers and knife mounting flanges in

the same spiral pattern as they were before
disassembly.

26726

NOTE:

The threads on the non-drive rotor flange are

left-handed threads.

NOTE:

The spiral arrangement of knives needs to be

reassembled in the same manner.

Right-hand Rotor Disassembly

Figure 4-4

Left-hand Rotor Disassembly

Figure 4-5

Rotor Bearing and Knife Removal

Figure 4-6

14703

14645

14700

Содержание OS1548



































































Результаты поиска

Содержание OS1548

Отзывы:

Бренды по названию

Популярные бренды

Land Pride OS1548, Руководство оператора

Результаты поиска

Содержание OS1548

Отзывы:

Бренды по названию

Популярные бренды