68
Section 9: Specifications & Capacities
NTS2607, NTS2609, & NTS2611 No-Till Seeder 329-141M
9/10/20
NTS2607
,
NTS2609
, &
NTS2611
Specifications & Capacities
Model Nos.
NTS2607
NTS2609
NTS2611
Overall width
97
" (246 cm)
111 1/2" (283 cm)
140 1/2" (357 cm)
Seeding width (broadcast)
86
" (218.44 cm)
100" (254 cm)
129
" (327.7 cm)
Weight w/o & with native seedbox
3-Point
Pull type
W/o native
1878#
(852 kg)
2,425#
(1100 kg)
With native
2209#
1002 kg)
2800#
(1270 kg)
W/o native
2,090#
(948 kg)
2,728#
(1237 kg)
With native
2513#
(1140 kg)
3123#
(1417 kg)
W/o native
2,650#
(1202 kg)
3,320#
(1506 kg)
With native
3,146#
(1427 kg)
3,800#
(1724 kg)
Main frame construction
3" x 4" Tube (7.6 x 10 cm)
3-Point hitch option
Category I & II
Category II
Category II
Formed A-frame plates; Fits Land Pride Quick Hitch
Pull package option
Includes tongue, park jack, hydraulic lift cylinders, hydraulic hoses, and fittings.
Hydraulic lift cylinders
Master/slave: Hitch lift cylinder 3.5" x 6" (8.89 x 15.2 cm),
Axle lift cylinders 3.25" x 6" (8.25 x 15.2 cm), and 3" x 6" (7.6 x 15.2 cm)
Maximum hydraulic flow
27 gpm (102 Lpm))
Maximum hydraulic pressure
3000 psi (20.7 mPa)
Tires
2 ea - 6.70 x 15" SL
4 ea - 6.70 x 15" SL
Tire rims
Five bolt holes on 5 1/2" (14 cm) bolt circle
Tongue weight with all 3 seedboxes
Seedboxes are without seed
1000 lbs (454 kg)
1055 lbs (478.5 kg)
1282 lbs (581.5 kg)
Grass seedbox
Small seeds seedbox
Optional: Native seedbox
Water tight construction with paddle type agitating above seed cups.
Water tight construction.
Water tight construction with agitating paddles above seed cups, and rear walk board.
Seedbox capacity:
Grass seed
Small seed
Native seed
7.5 bushels (264.3 L)
1.7 bushels (59.9 L)
8.5 bushels (299.5 L)
8.8 bushels (310.1 L)
2.0 bushels (70.5 L)
9.8 bushels (345.3)
11.3 bushels (398.2 L)
2.6 bushels (91.6 L)
12.7 bushels (447.5 L)
Lift sling brackets:
Two on grass seedbox for lifting grass seedbox or complete NTS Seeder assembly.
Seedbox lids
Heavy duty lid with seed splash guard.
Individual seedbox lockouts
Spring loaded lock in/out pins for the small seeds seedbox and native seedbox drives.
All seeds drive sprocket with
patented lockout clutch
Spring loaded dogs in lockout clutch drives all seedboxes while traveling forward only.
Spring loaded lock in/out pin engages and disengages power to all seedboxes.
Number of seed cups Grass seed
Small seed
12
12
14
14
18
18
Seed cups:
Grass & small seed
Native seed
Fluted for accurate metering
Meter sprocket
Seed cup settings
Grass seed
Small seed
Native seed
0 to 100 Adjustment lever, 4 position seed cup door, and high/low sprocket speed.
0 to 100 Adjustment lever.
4 Sprocket speeds and 4 gearbox speed changes.
Seed cup drive
Rear roller ground drive metering with #40 roller chain,
Grass seeds transmission speeds
High range, neutral, low range, & low reduction range
Seed drop protection
Wind guarded
Front rollers
Two 8 5/8" (21.91 cm) diameter spiked rollers capable of angling from 0 to 18 degrees
each and mounted on 1 1/4" (3.18 cm) greasable ball bearings.
Rear packer roller
Straight 11 3/8" diameter notched cast gray iron packer rings.
Number of rear rollers
1
2
2
Rear roller mounting
Mounted on floating 1" greasable ball bearings.
Roller spikes
Constructed of replaceable 5/8" x 2" (1.6 x 5 cm) heat treated steel.
Mud scrapers
Bolt on mud scrapers on front and rear rollers.
Signal lights
7 Pin connector
LED (light-emitting diode)
SAE J560 pin configuration
Acremeter option
Digital, battery operated.
Section 9: Specifications & Capacities