manualshive.com logo in svg

Land Pride MPS2607, Руководство оператора

Описание продукта Land Pride MPS2607: Здесь вы можете бесплатно загрузить Руководство пользователя для Land Pride MPS2607. Это важное руководство поможет вам разобраться с функционалом и правильным использованием продукта. Скачать его можно на manualshive.com. Упустите эту возможность!

Поделиться
Скачать
background image

24

Section 2: Operating Instructions 

MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-301M

Table of Contents

8/8/23

Hook-up Pull-Type Seeder

Refer to Figure 2-3:

WARNING

!

To avoid serious injury or death:  

Lightweight tractors with rear attached implements may need 
weights added to the front to maintain steering control. 
Consult your tractor Operator’s Manual to determine weight 
requirements and maximum limitations.

1.

Make certain park jack (#14) is properly attached to 
jack mount (#20) and secured with detent pin (#13).

2.

Adjust park jack as follows:

•

If seeder is resting on the ground, adjust park 
jack (#14) to support mainframe (#19) level. Do not 
adjust park jack to align clevis (#2) with tractor 
drawbar. Clevis height will be adjusted later in 
step 7.

•

If seeder was unhooked while raised off the 
ground, do not adjust park jack (#14) to align clevis 
(#2) with tractor drawbar. Clevis height will be 
adjusted later in step 7.

3.

Store tractor’s upper center 3-point link in its storage 
hook.

4.

Start tractor and raise 3-point lift arms fully up.

IMPORTANT: 

Detent pin (#13) must be fully inserted 

and secured before working on or around a seeder 
that is not hooked to the tractor drawbar.

IMPORTANT: 

 

(Drawbar to Clevis Height)

 

If clevis (#2) does not align properly with tractor 
drawbar during hook-up, the clevis height must be 
adjusted in hitch channel (#16). Do not adjust clevis 
height with park jack (#14). Using park jack to adjust 
clevis height can cause hydraulic lift cylinders to not 
function properly in the field.

5.

Carefully back tractor within close proximity of 
clevis (#2).

6.

Shut tractor down properly before dismounting. Refer 
to 

“Tractor Shutdown Procedure” 

on page 21.

7.

Hold clevis (#2) level. If tractor drawbar is higher or 
lower than clevis, adjust clevis in hitch channel (#16).

a. Remove nylock nut (#17) and bolt (#18).

b. Move clevis (#2) up or down until clevis (#2) is up 

one hole above tractor drawbar height.

c. Attach clevis (#2) to clevis hitch channel (#16) 

with existing 1"-8 x 6" GR5 bolt (#18) and nylock 
nut (#17). Draw nylock nut up snug. Do not 
tighten.

8.

Rotate clevis (#2) level and insert wire retaining 
pin (#7) as follows:

•

If hydraulic lift cylinder (#8) is retracted as 
shown, insert wire retaining pin (#7) in one of 
the holes on the right side of clevis (#2).

•

If hydraulic lift cylinder (#8) is fully extended 
insert wire retaining pin (#7) in one of the holes 
on the left side of clevis (#2). 

9.

Start tractor and continue to back tractor toward the 
seeder until hole in tractor drawbar and holes in 
seeder clevis hitch (#2) are aligned.

10. Shut tractor down properly before dismounting. 

11. Attach seeder to tractor drawbar by inserting 

customer supplied hitch pin (#6) through upper plate 
of clevis (#2), two upper washers (#1), tractor 
drawbar, as many lower washers (#1) as possible, 
and lower plate of clevis (#2). Secure hitch pin with 
customer supplied hitch pin keeper (#5).

NOTE:  

Hitch pin (#6) and keeper (#5) are customer 

supplied. The number of flat washers (#1) required 
will depend on tractor drawbar thickness. Not using 
flat washers can cause increased drawbar wear.

Tractor Hook-up to Pull-Type Seeder

Figure 2-3

37298

73360

Содержание MPS2607















































































Отзывы:

Нет отзывов

Похожие инструкции для MPS2607

Landoll SSB-8 Operator'S Manual preview
SSB-8
Бренд: Landoll Страницы: 90

Бренды по названию

Популярные бренды

Загрузить еще бренды