Land Pride MP10, Руководство оператора

Страница: 8 / 32

Important Safety Information
Table of Contents
MP10 & MP20 Moldboard Plows 307-244M 10/29/18
4
Safety Labels
Your Moldboard Plow comes equipped with all safety labels in
place. They are designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
39501
818-719C
Caution: General Information
Important Safety Information