Land Pride GS0548, Руководство оператора

Страница: 15 / 26

11
Section 2: Adjustments
GS0548 & GS0560 Grading Scrapers 303-474M
Table of Contents
1/20/23
Section 2: Adjustments
Level Scraper
WARNING
!
To avoid serious injury or death:
Always keep your body extremities out from under the
implement. Hydraulics can drop the implement if a line burst
or if lift controls are accidentally actuated.
The Grading Scraper should be leveled from left to right
and front to back.
1. Park tractor with Grading Scraper on a level surface.
2. Shut tractor down. See
“Tractor Shutdown
Procedure”
on page 8.
3. Manually adjust one of the lower lift arms on the
tractor up or down to level the Grading Scraper from
left to right.
4. Manually adjust length of top-center-link to level
scraper from front to rear.
Shank Depth Adjustment
WARNING
!
To avoid serious injury or death:
Always keep your body extremities out from under the shanks
while adjusting them. It is possible for the shanks to fall
causing injury to your feet and/or legs.
Refer to Figure 2-1:
The GS05 has three shank height settings. Shank
settings are based on the vertical distance measured
from bottom edge of skid shoes to bottom edge of shank
tips.
1. Either manually raise the front of the scraper up and
support it on two 4" (10 cm) hight support blocks or
hook the scraper to a tractor with a Category I 3-point
hitch. Refer to
“3-Point Hook-up”
on page 10.
2. If hooked to a tractor, raise scraper up about
6" (15 cm) . Without lowering the scraper, shut tractor
down properly before dismounting. See “Tractor
Shutdown Procedure”
on page 8.
3. Place 4" (10 cm) high support blocks under the four
corners of the scraper.
4. Restart tractor and lower scraper onto the blocks.
5. Shut tractor down properly before dismounting.
6. Remove shank retainer clip (#1).
7. Adjust shank (#2) up or down to the desired depth
and then replace shank retainer clip (#1).
8. Repeat steps 7 & 8 with remaining shanks.
3 3/4" (9.5 cm) Below Skid Shoes
1 1/2" (3.8 cm) Below Skid Shoes
1/2" (1.3 cm) Above Skid Shoes
Shank Settings
Figure 2-1
39854
39854
39854