Section 1: Assembly & Set-Up
Table of Contents
1/30/19
BS10, BS20, BSE10, & BSE20 Bale Spears 319-062M
7
Skid Steer & Tractor Hook-Up
Refer to Figure 1-4:
DANGER
!
To avoid serious injury or death:
A crushing hazard exists while hooking-up and unhooking the
attachment. Do not allow anyone to stand between attachment
and power machine while approaching or backing away from
the attachment. Do not operate lift and/or tilt controls while
someone is near the power machine and/or attachment.
Hook-Up With Euro Hitch
Refer to Figure 1-4:
WARNING
!
To avoid serious injury or death:
Check Euro style hitch fit-up frequently to make sure it is
properly secured under the attachment’s hooks and lock pins
are fully extended into the locking lugs. An improper fit-up can
result in the attachment coming loose and falling.
1.
Lower Euro style hitch plate down as far as possible.
2. If required, manually move locking handle until
locking pins are fully back and ready for hook-up.
3. Carefully drive up to the Bale Spear hooks until
mounting bar and hook guides on the Euro style hitch
plate are aligned under the Bale Spear hooks.
4. Raise Euro style hitch plate up until mounting bar is
completely caught inside the Bale Spear hooks.
5. Continue to raise Euro style hitch plate up to allow
bottom of Bale Spear to swing in until pin holes in
locking lugs align with locking pins in Euro style hitch
plate. If necessary, rotate top of Bale Spear hitch
back to align pin holes with locking pins.
6. If pins do not auto-lock into the pin holes, then
manually operate Euro style hitch plate lever to push
the locking pins into the pin holes. Make sure lever is
locked down to keep pins from backing out.
Hook-Up With Universal Quick Attach Hitch
Refer to Figure 1-5:
WARNING
!
To avoid serious injury or death:
Check hitch fit-up frequently. An improper fit-up can cause the
attachment to come loose from the loader hitch plate and fall.
1.
If needed, pull locking handles up on Skid Steer style
hitch plate until locking pins are raised up and ready
for hook-up.
2. Carefully drive up to the Bale Spear making sure the
hitch plate on the skid steer arms is parallel with the
Bale Spear hitch plate.
3. Rotate top of skid steer tilt arms slightly forward.
Bale Spear With Euro Style Hitch
Figure 1-4
Bale Spear With
Universal Quick Attach Style
Hitch
Figure 1-5
4. Place top of skid steer hitch plate under the top
angled bars on the Bale Spear.
5. Slowly lift skid steer hitch up until top angle bar and
Skid Steer hitch plate have come together.
6. Rotate top of Skid Steer style hitch plate back to align
bottom slots in the Bale Spear with locking pins in the
skid steer hitch plate
7.
Push lock handles on Skid Steer style hitch plate
down so that the pins go through the bottom slots of
the Bale Spear hitch plate and handles lock down.
35020
Bale Spear
Hitch Plate
Bale Spear Locking Lugs
Bale Spear Hooks
35021
Bale Spear
Hitch Plate
Bottom slots
Top
Angle Bar
