Land Pride BB0548 Скачать руководство пользователя страница 18

Страница: 18 / 24

Section 4: Maintenance

Table of Contents

2/17/20

BB0548 and BB0554 Fixed Bar Box Scraper 303-187M

Maintenance

Proper servicing and adjustments are key to the long life

of any implement. With careful inspection and routine

maintenance, you can avoid costly downtime and repair.
Check all bolts after using the unit for several hours to be

sure they are tight. Replace any worn, damaged, or

illegible safety labels by obtaining new labels from your

Land Pride dealer.
The parts on your Fixed Bar Box Scraper have been

specially designed and should only be replaced with

genuine Land Pride parts. Do not alter the scraper in a

way which will adversely affect its performance.

DANGER

To avoid serious injury or death:
Make adjustments to the implement after it has been properly

attached to a tractor and secured with solid non-concrete

supports in the up position. Never work around or under

equipment supported by hydraulics. Hydraulics can drop

equipment instantly if controls are actuated or if hydraulic

lines burst even when power to hydraulics is shut off.

WARNING

To avoid serious injury or death:

•

Allow only persons to perform maintenance on this

implement who have been properly trained in its safe

operation.

•

Always shut tractor down using “Tractor Shutdown

Procedure” provided in this manual before servicing,

adjusting, cleaning, or maintaining this implement.

•

Perform scheduled maintenance. Check for loose

hardware, missing parts, broken parts, structural cracks,

and excessive wear. Make repairs before putting the

implement back into service.

•

Do not alter implement or replace parts on the implement

with other brands. Other brands may not fit properly or

meet OEM (Original Equipment Manufacturer)

specifications. They can weaken the integrity and impair the

safety, function, performance, and life of the implement.

Replace parts only with genuine OEM parts.

•

Always keep your body extremities out from under the

shanks and cutting blades while removing, installing, and

adjusting them. It is possible for the cutting blades and/or

shanks to fall causing injury to your body.

Cutting Blade Removal and Shank Tip Removal

Figure 4-1

Shank Tips

Refer to Figure 4-1:

Shank tips are removable by heating them in the dimpled

area on both sides and knocking them off with a blunt

punch. New shank tips need to be dimpled with a punch

after they are installed.

Cutting Blades

Refer to Figure 4-1:

The front and rear cutting blades (#4) have two cutting

edges. Replace the cutting blades when both edges are

worn out.
1. Unbolt cutting blade (#4) and turn it over when its

bottom cutting edge wears out.

2. Inspect the 5/8" -11 x 1 3/4" GR5 plow bolts (#1), lock

washers (#3), and nuts (#2) for wear and replace as

needed.

3. Reattach blade (#4) and torque nuts to the correct

torque.

Dimpled Area

Shank Tip

23768

Section 4: Maintenance

Содержание BB0548

























Результаты поиска

Содержание BB0548

Отзывы:

Похожие инструкции для BB0548

Бренды по названию

Популярные бренды

Land Pride BB0548, Руководство оператора

Результаты поиска

Содержание BB0548

Отзывы:

Похожие инструкции для BB0548

Бренды по названию

Популярные бренды