28
Section 5: Maintenance & Lubrication
AFM4211 All Flex Grooming Mower 315-507M
4/12/11
Table of Contents
Driveline Constant Velocity Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
IMPORTANT: Extensive lubrication must be
performed every 8 hours of operation to extend the
life of the constant velocity joint!
•
Grease constant velocity joint in a straight position
to force grease through its passages and into the
cavity. Grease should be visible around ball joints.
•
Grease fittings in the outer telescoping member,
u-joints and driveline shields every 8 hours of
operation to prevent premature break down.
12726
Lubrication
50
Multi-purpose
spray lube
Multi-purpose
grease lube
Intervals in hours
at which lubrication
is required
Lubrication
Legend
Multi-purpose
oil lube
8
Hours
Inner Tube of Driveline
Type of Lubrication: Wheel Bearing Grease
Clean and coat all inner tubes of the drivelines with a light
film of grease and then reassemble.
12729
Inner
Tube
50
Hours
Driveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
12725
25
Hours
