Lancom LC-1823, Руководства

Страница: 35 / 51

LANCOM VoIP Routers: PBX Functionalities
Chapter 4: PBX functions in the LANCOM Business- VoIP- Router
34
EN
call-forwarding targets just as you would dial the subscriber from the
local telephone network. If you have deactivated spontaneous outside
line access and you have to dial a zero for outside calls, place a
leading zero before the call forwarding target here as well.
Configuring call forwarding with the telephone
Configuring call forwarding in the LANCOM Business-VoIP-Router from the
telephone uses the following combinations of characters:

Some ISDN telephones feature special keys or menu entries to
configure call forwarding, and these can be used as an alternative to
the listed character strings. Refer to the documentation from the
corresponding manufacturers.

If your telephone does not feature dedicated command keys, you can
store these commands as speed-dial numbers and store them to
dedicated keys.
4.2 Hunt groups with call distribution
Calls are normally intended for an individual or their telephone number.
Occasionally it is not important to speak to a particular individual, but to
Immediate call forwarding SIP, ISDN, Analog
Switch on and define target for call forwarding *21*TargetNo#
Switch off #21#
Switch off temporarily, maintain call-forwarding target #22#
Switch on again, maintain defined call-forwarding
target *22#
Call forwarding on busy SIP, ISDN, Analog
Switch on and define target for call forwarding *67*TargetNo#
Switch off #67#
Call- forwarding on no reply SIP, ISDN, Analog
Switch on and define target for call forwarding *61*TargetNo#
Switch off #61#