Lancom DSL/I-1611, Руководство пользователя

Страница: 32 / 66

Setting up Internet access
|
|
LANCOM Office
|
32
EN
•
When using time-based billing, you can set the LANCOM Office to
automatically close existing connections if no data has been trans-
ferred within a specified time (the so-called idle time).
In addition, you can activate a line monitor that identifies inactive
remote stations faster and therefore can close the connection before
the idle time has elapsed.
•
Active line monitoring can also be used with flat rate billing to con-
tinuously check the function of the remote station.
You also have the option of keeping flat rate connections alive if
required. Dropped connections are then automatically reestablished.
•
Dynamic channel bundling (ISDN only)
•
If required, the second ISDN B channel will automatically be bundled
to the connection. This doubles the available bandwidth; but it may
also double your connect charges as well. What's more, your ISDN
connection will be busy in this case, with all other incoming and out-
going calls being rejected.
•
Data compression (ISDN only)
•
This permits an additional increase in data throughput.
5.1 Instructions for LANconfig
a Highlight the LANCOM Office in the selection window. From the menu
bar, select Tools / Setup Wizard .
b Launch the 'Set up Internet access' wizard. Follow the wizard's instruc-
tions and enter the required information.
c From the menu, select Setup Internet access wizard and click Next .