Lancom DSL/I-1611, Руководство пользователя

Страница: 22 / 66

Installation
|
|
LANCOM Office
|
22
EN
3.3 Hardware installation
a Connect your LANCOM Office to the LAN. Plug the supplied network
cable (green plugs) into the 10/100Base-Tx connection of the device
4
and into a free connector socket of your local network (resp. a free socket
of a hub or switch in your LAN). It is also possible to connect an individual
PC. In this case, you turn the node/hub switch
5
on 'hub'.
b Connect your LANCOM Office to ISDN. Plug one end of the supplied ISDN
connector cable (light blue plugs) in the ISDN S
0
port
7
of the device and
the other end into an ISDN S
0
point-to-point or point-to-multipoint con-
nection (point-to-point or point-to-multipoint configuration).
c Connect your LANCOM DSL/I-10 Office or LANCOM DSL/I-1611 Office to
the DSL or cable TV network. Plug the supplied WAN connector cable
(deep blue plugs) into the 10Base-T-WAN connection
8
of the device, and
plug the other end into your DSL or cable modem’s Ethernet port.
Please notice that your DSL or cable modem must have an Ethernet connec-
tion (10Base-T). An operation of the LANCOM Office with a modem that has
only an USB or ATM interface is not possible.
d Connect the unit to an AC power supply using the included power
adapter, and switch the device on. After a short self-test the ‚Power/Msg'
LAN
Splitter
10Base-T WAN
10/100Base-Tx
phone line
DSL or cable modem
with Ethernet
connector
ISDN/S
0
ISDN adapter
DSL/cable modem connection only for
LANCOM DSL/I-1611 Office and
LANCOM DSL/I-10 Office