LANCOM CC Routers
K
First Steps
11
Fi
rs
t
St
ep
s
Customer-specific default settings will be loaded if the device con-
tains them, otherwise the LANCOM factory settings will be loaded.
Press for more than 15 seconds until all LEDs on the device light up
for the second time to restart while deleting the user-defined config-
uration. A rollout configuration will be loaded if the device contains
one, otherwise the LANCOM factory settings will be loaded.
C
After resetting, the device starts completely unconfigured and
all
set-
tings are lost, meaning that the device must be commissioned in line
with the CC PRE once again. If possible be sure to backup the current
device configuration
before
resetting.
f
Further information and support
The following information sources are available relating to the topics dis-
cussed in this documentation:
K
LCOS 8.70 CC, LANconfig, the corresponding SHA checksums, the guid-
ance documentation and further information is available under:
K
In the
Service & Support area
at
answers to frequently asked questions (FAQs), the LANCOM knowledge
base ("Support KnowledgeBase“ with full text search) and also telephone
numbers and contact addresses.
K
The
download section
contains all cross-
product elements such as the LANCOM Management System LCMS and
the LCOS documentation.
K
Product-related downloads such as the latest firmware or loader versions,
and also the firmware archive, are located on the myLANCOM portal at
K
In order to receive information about security updates, please subscribe
to the relevant newsletter on the LANCOM Systems website
CE declarations of conformity
LANCOM herewith declares that the devices of the type described in this doc-
umentation are in agreement with the basic requirements and other relevant
regulations of the 1995/5/EC directive.
The CE declarations of conformity for your device can be found on the relevant
product page on the LANCOM website (
).
