LANCOM 3850 UMTS
Chapter 2: Installation
20
EN
2.2.2
Operating access points in managed mode
LANCOM Wireless Routers and LANCOM Access Points can be operated either
as self-sufficient Access Points with their own configuration ("Access Point
mode“) or as components in a WLAN infrastructure, which is controlled from
a central WLAN Controller ("managed mode").
For operation in managed mode the Access Points require firmware of
version 7.22 or higher and a current loader (version 1.86 or higher).
2.3
Status displays, interfaces an hardware installation
2.3.1
Status display
Meanings of the LEDs
In the following sections we will use different terms to describe the behaviour
of the LEDs:
Blinking
means, that the LED is switched on or off at regular intervals in
the respective indicated colour.
Flashing
means, that the LED lights up very briefly in the respective
colour and stay then clearly longer (approximately 10x longer) switched
off.
Inverse flashing
means the opposite. The LED lights permanently in the
respective colour and is only briefly interrupted.
Flickering
means, that the LED is switched on and off in irregular inter-
vals.
Front side
The LANCOM Wireless Routers have status displays on the front panel.
3850 Wireless
Power
WLAN
DSL
UMTS
ETH 1
ETH 2
VPN
쐃
쐏쐄쐂
쐆
쐋
