Lancom 821+, Руководство пользователя

Страница: 62 / 76

LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721 VPN
Chapter 8: Security settings
61
EN
Select in the selection menu the setup wizard Control Security Settings
and confirm your choice with Next .
Enter your password in the following windows and select the allowed pro-
tocols for the configuration access from local and remote networks.
In a next step parameters of the configuration lock like number of failed
log-in attempts and the duration of the lock can be adjusted.
Now activate Stateful Inspection, ping-blocking and Stealth mode in the
the firewall configuration.
The wizard will inform you when entries are complete. Complete the con-
figuration with
Finish .
8.1.2 Wizard for WEBconfig
Under WEBconfig you have the possibility to run the wizard Security settings
to control and change the settings. The following values are handled:
password for the device
allowed protocols for the configuration access of local and remote net-
works
parameters of configuration lock (number of failed log-in attempts and
duration of the lock)
8.2 The security checklist
The following checklists provide an overview of all security settings that are
important to professionals. Most of the points in this checklist are uncritical
for simple configurations. In these cases, the security settings in the basic
configuration or that were set with the Security Wizard are sufficient.

Detailed information about the security settings mentioned here are
to be found in the reference manual.
Have you protected the configuration with a password?
The simplest way of protecting the configuration is to agree upon a pass-
word. If no password has been agreed for the device, the configuration is
open to be changed by anybody. The field for entering the password is to
be found in LANconfig in the 'Management' configuration area on the
'Security' tab. It is absolutely imperative to assign a password to the con-
figuration if you want to enable remote configuration!