Lancom 3550 Wireless, Руководство пользователя

Страница: 43 / 81

LANCOM 3550 Wireless
Chapter 5: Setting up the UMTS profile
43
EN
Even without an current connection, the active local networks are dis-
played in the 'UMTS/GPRS network' section. LANmonitor also indicates
which networks are permitted and which networks the card cannot con-
nect to.
햸
In the System information section, LANmonitor displays the recognized
data card and the signal strength of the home network with which the
card is connected to the Internet. The display of signal strength an the
operating mode is dependent on the UMTS card in use.
LANmonitor’s signal strength display is highly useful for testing the recep-
tion quality at locations where the data card is to be put into service. With
a displayed signal strength of three bars (green) you can safely assume that
the signal strength is strong enough for good quality data transfer. With
two bars (yellow) the quality of data transfer is questionable, and with one
bar there will be no data transfer at all in most cases.