LANCOM 1811n Wireless – LANCOM 1821n Wireless
Chapter 2: Installation
36
EN
1821+ only
ADSL
– connect the ADSL interface
to the splitter using the supplied
ADSL connector cable (transparent plugs).
ISDN
– to connect the LANCOM Router to the ISDN, plug one end of the
supplied ISDN connector cable (light blue plugs) in the ISDN/S
0
port
of
the router and the other end into an ISDN/S
0
multi-device mode or point-
to-point mode connection.
1821+ only
USB port
– you may optionally connect printers with USB connector to
the LANCOM and make them available to the entire network. The
LANCOM provides a print server to manage the printing jobs from the net-
work. Supported protocols are RawIP and LPR/LPD.
Futher information about configuration of the print server can be
found in the LCOS reference manual.
Configuration port
– you may optionally connect the router directly to
the serial port (RS-232, V.24) of a PC. Use the cable supplied for this pur-
pose. Connect the configuration port of the LANCOM
with a free serial
port of the PC.
Connect to power
– Connect socket
of the unit to a power supply
using the included power adapter.
Use the supplied power supply unit only! Using an unsuitable power
supply unit may cause damage or injury.
Operational?
– After a short device self-test the Power LED will be per-
manently lit. Green LAN LEDs indicate the LAN sockets that have function-
ing connections.
Devices with integrated ADSL modems can become very warm during
operation. For these models, environmental temperatures are not to
exceed 35°C. Sufficient ventilation is of vital importance. Do not stack
the devices and do not expose them to direct sunlight.