LANCOM CC Routers
K
First Steps
5
Fi
rs
t
St
ep
s
K
Via the serial configuration interface
2
.
The serial configuration cable is included the LANCOM CC Start-up Kit.
I
Always switch on the device for configuration before you switch on
the computer.
...with LANconfig
K
Start LANconfig
. Unconfigured LANCOM devices in local networks are
detected automatically.
I
LANconfig may be unable to detect devices in the LAN if the "Internet
connection firewall" or any other personal firewall is activated on the
configuration computer. If your unconfigured device cannot be found,
deactivate the firewall for the time during which you carry out the
configuration.
K
The CC Start-up Wizard starts automatically. For detailed information
about the wizard and its operation see item
d
.
Network without a DHCP server
Find the current IP address of the configuration computer (with
Start
E
Run
E
cmd
and enter the command
ipconfig
at the command prompt under
Windows XP, Windows Vista, Windows 7 or Windows 8). In this case, the
LANCOM can be accessed with address
x.x.x.254
(the “x”s stand for the first
three blocks in the IP address of the configuration computer).
...via the serial interface
K
Connect the computer
via the
serial configuration interface
and con-
duct the configuration with
LANconfig
or with a
terminal program
.
ROUTER
ROUTER
LAN
1
2
PC
Outband
