lancer 810 LX, Инструкция по установке и эксплуатации, Страница: 32 / 33

810 LX / INSTALLATION
NI_810-815_LX_PILOTE_ANG_A.doc 32
THE WASHING PRODUCTS
(STANDARD)
NON-FOAMING DETERGENT
Place a container of NON-FOAMING LIQUID DETERGENT next to the
washer at a maximum height of 150 mm (6 inches) above floor level. Remove
the cap from the detergent container and insert the detergent suction tube into the
detergent container. Tighten the cap.
IT IS STRICTLY PROHIBITED TO USE SOLVENTS AS DETERGENT.
PLEASE REFER TO SUPPLIERS MATERIAL SAFETY DATA SHEET FOR
SPECIFIC INFORMATION REGARDING THE DETERGENT USED IN
THIS EQUIPMENT.
NEUTRALIZING ACID
Place a container of NEUTRALIZING ACID next to the washer at a maximum
height of 150 mm (6 inches) above floor level. Remove the cap from the acid
container and insert the acid suction tube into the acid container. Tighten the
cap.
THE USE OF NITRIC ACID IS PROHIBITED. ONLY DILUTE
PHOSPHORIC, ACETIC AND CITRIC ACIDS CAN BE USED.
PLEASE REFER TO SUPPLIERS MATERIAL SAFETY DATA SHEET FOR
SPECIFIC INFORMATION REGARDING THE ACID USED IN THIS
EQUIPMENT.
BEFORE CARRYING OUT ANY WORK ON THE WASHER
,
MAKE SURE IT IS SWITCHED OFF AT THE DISCONNECTING
SWITCH
.