Lance 1130, Руководство пользователя

Страница: 92 / 132

92
DINETTE CONVERSION BENCH SEATING
To convert the dinette area into a sleeping area:
1. Lower table to dinette supports.
2. Arrange seat and back cushions as shown in the
picture.
SOFA CONVERSION
To convert a sofa bed into a bed:
Lift front of sofa seat (above front kick panel) up and
out. The back of the sofa will drop back and down as
the seat is pulled outward.
To restore the sofa:
Lift the front edge of the sofa seat up, and push it
back towards the rear. The sofa back will come up.
Push the sofa fully into position.
FREE STANDING FURNITURE
When preparing for travel, secure free-standing
furniture. Lamps, chairs, tables, or other items if left
unsecured can move around inside the trailer while
traveling and can be damaged or damage other furni-
ture, cabinetry or flooring.
MINI-BLINDS
To raise mini-blinds, release the bottom of the blind
from the retainers. Pull straight down on the cord and
release at desired height. It is not necessary to pull
the cord to one side or the other to secure blind.
To lower mini-blinds, pull straight down on the cord
slightly and move it about 45 degrees to either the
left or right and lower the blind. To stop the blind in
mid-travel, move it back to the straight down position.
Reattach the blind to the retainers when traveling.
To adjust the angle, turn the adjusting rod either
direction.
FOLDING DIVIDER DOOR
The divider glides on nylon rollers. It is held closed
by a catch. When the divider is open for traveling, be
sure to attach the hold back latch to keep it from slid-
ing back and forth.
FOLD DOWN BUNK
To lower, pull the latches located at each end and
lower the bunk. Place the loose panel over the door
openings and unfold the bunk mattress. The bunk is
rated for 150 lbs.
FOLD DOWN TENT
The tent door has two bar lock door latches that are
keyed the same as the entry door.
To open the bed door, depress the latch and pull the
bar lock lever down on one of the latches. Move to
the other side and while supporting the door, repeat
the process. Carefully lower the door until it has ex-
tended into the bed position.
WARNING
Heavy Door Stand Clear
Failure to comply can result in serious injury.