Lance 1130, Руководство пользователя

Страница: 100 / 132

100
Wax the exterior at least once a year, preferably twice.
Use automotive waxes or cleaners/polishes devel-
oped for use on fiberglass boats, showers and tubs.
Be sure to follow the directions on the wax container.
Some cleaners and waxes are recommended for use
on only certain types of surfaces. Exterior streaking is
reduced with more frequent waxing. Do not use abra-
sive cleaners or rubbing compounds. Always wash
and dry the whole trailer before waxing it. Rubbing
alcohol can be used on caulking that show signs of
yellowing.
You should clean your roof at least four (4) times a
year. For normal cleaning use a mild liquid detergent
and water mixture, or Murphy’s Oil Soap with a soft
nylon brush or sponge. Do not use solid or granu-
lated cleaners, as they will mar the finish. For more
difficult stains, use a cloth dampened with mineral
spirits. DO NOT use mineral spirits in a large area or
allow it to soak into the roof membrane.
ROOF IS SLIPPERY WHEN WET
Exterior Graphics
The pressure sensitive vinyl graphics installed on
the exterior surface of your trailer require little main-
tenance and should be treated similarly to a painted
surface. The following cleaning and maintenance
recommendations should be followed to ensure the
maximum appearance and performance of your exte-
rior graphics.
Wash your graphics with the same solution as noted
above for washing the exterior of your trailer. Be sure
to rinse thoroughly.
Test any cleaning solution on a small section of the
graphic before using the cleaning solution on a larger
surface. A non-abrasive cleaner, suitable for high
quality painted surfaces, is recommended. The clean-
ing solution should be neither high acidic nor highly
alkaline; a pH range of 3 to 11 is recommended. The
cleaning solution should be free of strong solvents
or alcohol. Avoid contact of window cleaners that
contain ammonia.
Sealant Renewal
The adhesives and sealants used in the construction
of your trailer were developed to remain waterproof
under sustained effects of weather and vibration.
However, even the finest materials will eventually dry
out and lose their effectiveness under the constant
heat of the sun, attack by other elements and road vi-
bration. Leak damage caused by neglecting to follow
these procedures may affect your warranty.
Your Lance Trailer dealer can perform the reseal-
ing inspection and work for you, and has current
information on sealants used in your trailer and can
recommend the appropriate sealants if you prefer to
do this work yourself. Always use the recommended
sealants.
To protect your trailer from possible water intrusion
damage, your unit should be inspected thoroughly
and resealed bi-annually. Inspect the sealant around
the roof moldings, windows and doors at least every
six months. If any of the following are evident during
inspection, the affected areas must be resealed:
Weathering or drying of sealant.
Sealant cracked or peeling.
Voids in sealant.
Shrunken or separated sealant.
Clean all areas to be resealed with mineral spirits.
Make sure that all areas to be resealed are absolutely
dry before new sealant is applied.
Mineral spirits is a flammable liquid. Use extreme
care when handling. Do not expose to open flame,
sparks, or smoking materials. Do not use in unventi-
lated areas.
Check and tighten any loose fasteners. Be careful not
to over-tighten, or stripping will occur.
If you find any of the above:
If areas on the roof need to be resealed, remove any
loose or cracked sealant being careful not to damage
the roof. Use a wooden or plastic scraper that will not
gouge, pierce, or otherwise damage the roof. The
roof can be cut or punctured by sharp objects.
Apply the new sealant in a continuous bead along
the seams and flanges, being careful not to leave any
voids. Apply enough sealant to flow over the heads of
all fasteners.
Allow at least 48 hours for the sealant to set com-
pletely (firm and tack-free when pushed with the
thumb) before washing or waxing the trailer.