5. Manual Brew Cycle
To manually start a brew cycle press the “Brew” button. The brew light will turn red once the cycle has started. If brewer
is cold, the heater will preheat the water before starting the brew cycle. After the selected amount of water is
dispensed, the brew light will blink for 40 seconds. At that time the BREW EXPRESS will beep 4 times.
6. Automatic Brew Cycle
To automatically start a brew cycle press the “Timer” button, the button will illuminate and the start time will blink
5 times on the clock display.
To set the start time:
Press and hold the “Timer” button for 5 seconds.
Press the “2 Cup/4 Cup” button to set hours. Note AM/PM indicator light. Holding down button advances hours.
Press the “Timer” button to set the minutes. Holding down button advances minutes.
Press “Light” button to finish time setting.
7. Pause-N-Brew Feature
The BREW EXPRESS carafe can be removed during brew cycle to pour a cup of coffee. The detection sensor will stop
the flow of water and the valve on the brew basket will prevent existing water from spilling. Once carafe is
returned, operation will continue. If carafe is missing for over 5 minutes, BREW EXPRESS will shut off automatically.
8.
Accent Lights
To turn on and off the accent lights press the “Light” button. The accent lights are located behind the brew basket.
9. Sound Setting (Beeper On/Off)
At the end of a brew cycle a beeper is sounded 4 times.
To turn off the beeper:
Press and hold the “Brew” button for 5 seconds.
A single beep will indicate the sound is off. Also, the beeper indicator light will be off.
Two beeps will indicate the sound is on. Also, the beeper indicator light will be on.
10. Carafe Lock Removal
The Brew Express is shipped with a carafe lock to prevent the carafe from moving in mobile applications
(marine, recreational vehicles) or to prevent accidental removal by children. If this device is not required it can
easily be removed. Depress the sides of the carafe lock lever until the support pins clear their mounting holes
and pull out. There is a spring that also needs to be taken out. To reinstall just reverse the removal steps.
7
OpERatiOn
lock lever and spring
depress sides of lock lever
to remove
