connect 8 output line respectively with the power input end of the server which needs power supply. Connect
one side of input line plug with the LIU - 0816 - WN IEC320 C20 input socket, and the other side with the
AC power supply socket. After that, LIU - 0816 - WN will start from the first port to the 8th port with
interval of 1 second, and supply power for the server. Display panel will show the current supply voltage and
total output current of 8 circuits, 8 LED indicator light indicates the state of current 8 output port.
2. Check the IP address
The display will show LIU - 0816 - current IP address after pressing the FUNC
button when the display shows the voltage and current. The default IP address is 192.168.0.10
3. Check the temperature and humidity
The display will show temperature and humidity of LIU - 0816 -
WN built-in temperature and humidity sensor after pressing the FUNC button in the state of screen shows
the IP address. The left screen shows temperature and the right screen shows humidity.
4. Reset of the equipment
Press the LIU - 0816 - WN RST button on the front panel, it will reset .
5. Restore the factory default value of the device
Press the FUNC key 10-15S to hear the buzzer drop two
to indicate the IP address of the device. The user name and password are restored to the factory default
values.
Network access and control
With LIU - 0816 - WN power-on, users can achieve the function that PC host
access and control LIU - 0816 - WN in the same LAN by connecting RJ45 socket with network
①
. Login control interface
Open the IE browser on any PC in LAN host, the address bar:
uses can login LIU - 0816 - WN control interface after inputting user name (admin),
password (admin) in the jumped login screen as shown in the picture below.
②
. PDU system information
Click the "System" on the left side of the information bar, to indicate the PDU
system information as the following picture.
https://www.armadi-rack.it/code/id_prod-103222
