Lanair XT-75, Руководство по установке и эксплуатации

Страница: 6 / 54

1
Call 1-888-370-6531 for Technical Support
1. Safety, Codes and Regulations
Thank you for the purchase of a Lanair used oil heater. Lanair heaters are designed and tested
for safe, reliable long-term operation. However, proper installation, fuel quality control, and
regular maintenance are required. Please read and understand this manual completely before
attempting to install, operate, or service the heater. Post this instruction manual and maintain it in
legible condition. If you have any questions, call your local service provider or the number below
for Technical Support.
1.1 General Warnings
•
Do not use this product where gasoline vapors or other explosive vapors
may be present.
Do not use this product near sources of heat, sparks or open flames.
•
The Lanair burner is to be used only in the Lanair heater provided.
Do not attempt to use the burner for other purposes.
• Do not tamper with the unit or controls – call your service technician.
• Do not attempt to use unit with broken or damaged components.
•
This heater is not designed for use with ductwork.
•
Do not allow unqualified personnel to install or service the heater, electrical
system, or flue system. Contact Lanair for help with finding a qualified installation and
service company. Failure to install and maintain your heater properly will void your warranty
and the UL listing.
•
Do not attempt to start the burner when excess fuel has accumulated inside
the heat exchanger, when the heater is full of vapor, or when the combustion chamber is
very hot.
•
Do not start the burner unless all cleanout panels are secure in place.
• Turn off power to the burner when it will not be used for extended periods (weeks).
Wait 10 minutes after power has been restored for the oil to heat up, prior to turning the
thermostat up and starting the heater.
•
The heater is designed to be installed on non-combustible flooring. It should
be bolted down to prevent tipping or movement that could cause the flue pipe to come
loose.
•
Used oils contain heavy metallic compounds and foreign materials. When
burned, these compounds are emitted from or deposited within this heater appliance and
therefore care should be taken when using, cleaning and maintaining this equipment.
• Lanair recommends that the building have a secondary heat source during
times the heater is down for maintenance or service. Used oil heaters require
maintenance. Also, used oil may sometimes be unavailable or burn poorly due to
contaminates in the oil. The heat from the secondary heater should be directed away from
the heater.