Lanaform WBPM-100, Руководство пользователя

Страница: 5 / 74

EN FR NL DE SL SV
WBPM-100 EN Instruction manual 5 / 74
Removing the batteries
• Flat and fully discharged batteries must be dis-
posed of in special containers or at collection
points intended for this purpose or returned
to an electrical appliance retailer. You have a
legal obligation to dispose of batteries properly.
SET-UP DATE AND TIME
• This menu allows you to adjust the following
functions one after the other:
Time Date Hour format
You must adjust the date and time.
Without these adjustments, it is impossible
to register and read your measurements
accurately with the date and time.
Time format
• Press and hold down the STOP/
START button
(2)
and the memory
button
(3)
at the same time for 3
seconds or insert the batteries.
• Using the memory button
(3)
, select the time
format you require and confirm by pressing the
STOP/START button
(2)
.
Date
• The year flashes on the screen. Using
the memory button
(3)
, select the
year you require and confirm by
pressing the STOP/START button
(2)
.
• The month flashes on the screen. Using the
memory button
(3)
, select the month you re-
quire and confirm by pressing the STOP/START
button
(2)
.
• The day flashes on the screen. Using the memory
button
(3)
, select the day you require and confirm
by pressing the STOP/START button
(2)
.
If the time format has been adjusted
to 12 pm, the order of the day and
month displayed is reversed.
Time
• The time flashes on the screen. Using the memory
button
(3)
, select the time you require and con-
firm by pressing the STOP/START button
(2)
.
• The minutes flash on the screen. Using the
memory button
(3)
, select the minutes you
require and confirm by pressing STOP/START
(2)
.
• Once all the dates have been adjusted, the device
automatically switches off.
MEASURING BLOOD PRESSURE
Positioning the cuff
• Blood pressure may be different be-
tween the right and left arm and the
blood pressure values may therefore
also be different. Always take the meas-
urement on the same arm.
• If the values between the two arms are very dif-
ferent, you must decide with your doctor which
arm to use for the measuring process.
• Make sure your left wrist is bare. Make sure that
your blood circulation is not restricted by clothes
that are too tight or anything else. Put the cuff
on the inside your wrist.
• Close the cuff with the Velcro fastening so that
the upper edge of the device is approximately 1
2cm from the palm of your hand.
• The cuff must be wrapped tightly around the
wrist without strangling it.