202104LA090207003 · 09/02/21 ·
7
25
Attention that changes or modification not ex
-
pressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
26
Swallowing batteries and/or battery fluid can
be extremely dangerous. Keep the batteries
and the unit out of the reach of children and
disabled persons.
27
If you are allergic to plastic/rubber, please don’t
use this device.
09. Setup And Operating Procedures
01
Battery Loading
a
Open battery cover at the back of the monitor.
b
Load two AAA size batteries. Please pay at-
tention to polarity.
c
Close the battery cover.
When LCD shows battery symbol , re-
place all batteries with new ones.
Rechargeable batteries are not suit-
able for this monitor.
Remove the batteries if the monitor will not
be used for a month or more to avoid rel-
evant damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it
should get in your eyes, immediately rinse with plen-
ty of clean water and contact a physician.
The monitor, the batteries and the cuff, must
be disposed of according to local regulations
at the end of their usage.
02
Clock And Date Adjustment
a
Once you install the battery or turn off the
monitor, it will enter Clock Mode, and LCD will
display time and date. See picture 2.
b
While the monitor is in Clock Mode, press
the
START
and
MEM
button simulta-
neously for two seconds, then release the
buttons, the monitor will be in Clock and
Date Adjustment Mode.
c
In Clock and Date Adjustment Mode, the time
format will blink at first. See picture2-1.
While time format is blinking, press the
button
MEM
to change the time format.
The default time format is 24h.
d
Press the button
START
repeatedly, the year
(range is 2018~2099), month, day, hour and
minute will blink in turn. See picture2- 2&2-3
& 2-4 & 2-5 & 2-6. While the number is blink-
ing, press the button
MEM
to increase the
number, keep on pressing the button
MEM
,
the number will increase faster.
e
During adjusting clock and date, the monitor
will go back to Clock Mode automatically when
no button will be pressed within 60 seconds.
f
You can turn off the monitor by press-
ing
START
button when the minute is
blinking, then the time and date is confirmed.
