Lanaform Aroma Design, Инструкция по эксплуатации

Страница: 5 / 12

EN
- Make sure that children and minors do not play with or use the appliance.
- A few drops (no more than 3 or 4) of essential oil suffice to ensure correct operation of the appliance and the diffusion
of perfume. Using too much oil can damage the machine.
- Always put water in the tank before adding essential oils.
- Lanaform ® cannot be held liable for accidental damage resulting from any use not in accordance with the present
Instructions.
CARE AND STORAGE
If the water has too much calcium and magnesium, it can leave a “white powder” on the device. If this residue collects
on the transducer (the metal disc which produces the ultrasounds) this will prevent the Aroma Design from working
correctly.
We recommend:
1) Use only boiled and cooled water each time you use the device,
2) Cleaning the tank every 2 days and cleaning the transducer once a week,
3) Changing the water in the tank every 2 days,
4) Cleaning the Aroma Design (see instructions below) and making sure that all its components are completely dry when
not in use.
To clean the transducer:
1) Pour 2 to 5 drops of vinegar on its surface and leave for 2 to 5 minutes.
2) Brush the scale off the surface with a soft brush. Do not use a hard tool to scratch at the surface.
3) Rinse the tank with fresh water.
4) Do not use soap, solvent or any other cleaning spray to clean the transducer.
To clean the tank unit:
1) Clean the water basin using a soft cloth and vinegar if there is any residue or calcium deposit inside.
2) Rinse the tank with clear water.
Storage:
Store the device in a dry cool place, out of reach of children after it has been cleaned and dried.
TROUBLESHOOTING
If the device is not working correctly, under normal conditions, consult the following table:
6