EN
FR NL DE SL SV
ABPM-100
EN Instruction manual
5
/ 74
Removing the batteries
•
Flat and fully discharged batteries must be dis-
posed of in special containers or at collection
points intended for this purpose or returned
to an electrical appliance retailer. You have a
legal obligation to dispose of batteries properly.
SET-UP DATE AND TIME
•
This menu allows you to adjust the following
functions one after the other:
Time Date Hour format
You must adjust the date and time.
Without these adjustments, it is impossible
to register and read your measurements
accurately with the date and time.
Time format
•
Press and hold down the STOP/
START button
(2)
and the memory
button
(3)
at the same time for 3
seconds or insert the batteries.
•
Using the memory button
(3)
, select the time
format you require and confirm by pressing the
STOP/START button
(2)
.
Date
•
The year flashes on the screen. Using
the memory button
(3)
, select the
year you require and confirm by
pressing the STOP/START button
(2)
.
•
The month flashes on the screen. Using the
memory button
(3)
, select the month you re-
quire and confirm by pressing the STOP/START
button
(2)
.
•
The day flashes on the screen. Using the memory
button
(3)
, select the day you require and confirm
by pressing the STOP/START button
(2)
.
If the time format has been adjusted
to 12 pm, the order of the day and
month displayed is reversed.
Time
•
The time flashes on the screen. Using the memory
button
(3)
, select the time you require and con-
firm by pressing the STOP/START button
(2)
.
•
The minutes flash on the screen. Using the
memory button
(3)
, select the minutes you
require and confirm by pressing STOP/START
(2)
.
•
Once all the dates have been adjusted, the device
automatically switches off.
MEASURING BLOOD PRESSURE
Positioning the cuff
•
Put the cuff on your bare left
arm. The circulation in your
arm must not be restricted
by clothes that are too tight
or anything else.
•
Position the cuff on your
arm so that the lower edge
is 1 - 2cm above the crook of your elbow and
above the artery. The pipe is directed towards
the middle of your palm.
•
Now close the free part of the cuff around your
arm using the Velcro without making it too
tight. You must be able to insert two fingers
under the cuff.
•
Now connect the cuff’s pipe into the cuff’s
power supply.
The device must only be used with the
original cuff. The cuff is intended for an
arm circumference of 22 to 30cm.
Содержание ABPM-100
Страница 69: ...EN FR NL DE SL SV ABPM 100 69 74...
Страница 70: ...EN FR NL DE SL SV 70 74 ABPM 100...
Страница 73: ......
