9
M1 - LAMP REPLACEMENT
The lamp must be replaced with the same type of lamp and according to the same frequency. A less efficient lamp jeopardizes
projector performance. Replace the lamp as follows:
- When the projector is cold, turn off the ON/OFF switch to cut the electricity and follow the instruction as explained in page 3 of
this manual .
-Switch on the projector to make sure the lamp is working correctly.
M3 - SURFACE TEMPERATURE TEST
Before you check the temperature, make sure the projector is in the full operating mode (wait about 20 minutes after switching
on the projector). Use a contact probe to measure the surface temperature on the projector’s metal case and determine the
hottest area (Top lid near to the lamp). The temperature must be less than 70°. Otherwise, check the cooling system.
M4 - CLEANING
ATTENTION
Cleaning must be carried out when the projector is cool, disconnected from the power supply and with the general power switch
turned off.
FREQUENCY
It is recommended to clean the projector every two months to ensure efficiency and performances. If the projector is used in
particularly smoky or dusty areas, clean the projector more frequently.
1. Use a (soft) compressor to remove the dust from the front areas and from the fan (keeping the fan blocked with i.e. a
screwdriver)
2. Use a vacuum cleaner to remove dust.
3. Use a soft cloth (non-fabric) and pH neutral (pH7) liquid detergent to clean front glass and the other surfaces. Make sure you
remove all residual traces.
4. Make sure the cleaning procedure did not damage any internal part or modified their correct position.
5. Make sure no cleaning materials or tools remain inside the projector.
LIFE SPAN AND DISPOSAL
If the projector is operated in ordinary working conditions and the user follows the planned maintenance operations established
by the Manufacturer, it should last for three years. When the projector is discarded, it must be disposed of according to recycling
laws.
The improper use of this projector, cancel the guarantee and our responsibility. All the information have been written and driven
with extreme care; however, we do not engage us any responsibility for contingent errors or omissions. We reserve the right to
modify and/ or improve our product as we retain necessary, without subsequent warning or notice. It is forbidden any complete
or partial reproduction of this handbook, if not expressly authorized.
